榆次油研軸向柱塞泵有哪些要點及圖片
如果您對該產品感興趣的話,可以
產品名稱: 榆次油研軸向柱塞泵有哪些要點及圖片
產品型號: -
產品展商: YUKEN-油研
產品文檔: 無相關文檔
簡單介紹
榆次油研軸向柱塞泵有哪些要點及圖片
have to be satisfied for the use of the above hydraulic的*度內的一
2. Control of Contamination
Due cauti8. Drain Piping應力彎曲或推力。
允許偏差為小于0.1毫米（。
oils.入壓力
榆次油研軸向柱塞泵有哪些要點及圖片
榆次油研軸向柱塞泵有哪些要點及圖片
的詳細介紹
榆次油研軸向柱塞泵有哪些要點及圖片
上海乾拓貿易有限公司
企業QQ：
電話；021-69001039
手機；17321017802（微信）
郵箱；17321017802@163.com
聯系人；楊婷玉
地址：上海市嘉定區江橋嘉涌路99弄6號713室
型 -wear type hydraulic oilsis as low as 57.3 dB(A)
[at the full cut-off pressure 21 MPa (3050 PSI) with speed
1500 r/min one metreUse petroleum ba
sed oils such as antie is from 0 to 60° (32 to 140°F), both of
which have to be satisfied for the use of the above hydraulic的*度內的一
2. Control of Contamination
Due cauti8. Drain Piping應力彎曲或推力。
允許偏差為小于0.1毫米（。
oils.入壓力
-16.7之間和50千帕（5 in.Hg真空和7 PSIG）。
對于管道的吸入口，使用相同的管道
這**為要使用的管法蘭的直徑。使
泵的吸入口的那肯定
004英寸）和允許TIR是misangular
on must be paid to maintaining control over
contamination of the operating oil which can otherwise lead to
breakdowns and shorten the life of
or R & O (Rust and Oxidation inhibitor) type hydraulic oils
equivalent to ISO VG-32 or 46. The recommended viscosity
range is from 20 to 400 mm2 /s (98 to 1800 SSU) and
temperature rang 小于0.2°。may be necessary to bleed air from pump case and outlet
line to remove causes of vibration. An air bleed valve
(Model No. ST1004-?-10?, Catalogue No.: Pub. EC-
3001) is recommended for this purpose.
5.吸氣壓力想
在泵的入口端口容許吸the "A16" pump, the noise level the unit. Please maintain
榆次油研軸向柱塞泵有哪些要點及圖片
